OEM Retrofit seats from facelift to older ones.

Well bought my leather interior, but then came across a problem, the sockets are different so is plug for the tensioner.



First of course remove front seats. didnt take picture of that as there is a lot of threads on how to remove them.



Then I took a paper and took a look at all the wires, just wrote down on paper what color they are first on the new seat with yellow, then on the older black socket. My passenger seats had 11 wires, but they had little difference, the seat heater wires are different color coded. But this aint problem as this is also found in the forum which one to match.

Drivers seat had 18 wires on yellow socket, 17 on black. 1 extra wire on yellow socket goes to little pin near tensioner(probably seat belt detector?not sure?) In my case I left it, just taped the head to prevent some circuit failures.



Then when you are sure, most of the wires are the same. Ah, also the tensioner wires, are different on yellow they are two medium thin black ones and on black one they are glued 2 wires into 1 big insulation wire hard to miss

Well here are some pictures.













Tensioner







All seat in place.

OEM Retrofit seats from facelift to older ones.